LITE-BLAZER

* License Plate mounted LITE-BUDDYs used on many hard to fit motorcycles.

* A Motorcycle lighting improvement to increase the visibility of your motorcycle from behind!

The HIGH INTENSITY LED's used in the LITE-BLAZER must be aimed exactly level to get the best exposure – the intense beam must be level so that it is visible to vehicles several hundred feet behind your motorcycle, to increase your visibility to others.

The mounting plate will have a slight bend in it ( 15 degree) or is flat depending upon the mount of the license plate on your bike to level the beam.

Order the LITE BLAZER version that fits your bike.

MOUNTING: the LITE-BLAZER with the slight bend in the plate only mounts with the Blazer under the license plate plate under the license plate. The LITE BLAZER on the flat plate can be installed with the BLAZER unit above or under the License plate

The two outer clusters are “running” or additional taillights on the standard version (# 56011)

BRAKE Warning! (on the standard version # 56011) The center unit is a solid stop light (it is slightly brighter then the running lights) and in addition, when the brakes are applied, the built in flasher causes the outer clusters to flash 6 – 7 times and remain on solid after that, so you do not flash into somebody's face when standing and holding the brake.

The RED HIGH INTENSITY bulbs used in the LITE-BLAZER are aimed exactly level – the beam must be level so that it hits vehicles at eye level several hundred feet behind the motorcycle!

Each Motorcycle will have a different taillight so these are general instructions for electrical connections.

The mounting plate slips under the license plate and is held in place with the lower mounting screws. Depending upon your bike, you will need a plate with a bend in it or a flat plate (Harley)

Connect the BROWN ground wire to a motorcycle ground wire.

Connect the “hot” BLACK, 12 volt + wire to a taillight wire, the wires will connect at the back of the taillight.

Connect the GRAY wire to the stoplight wire.